ELECTROLUMINESCENT GAUGE CLUSTER REMOVAL: 1960 Chrysler

• Disconnect the battery ground cable
• Remove the steering wheel
• Remove the steering jacket tube cover from underside of the jacket tube
  
• Disconnect all the wires at the terminals before loosening the cluster attaching screws.
• Remove the two screws (one each side of steering jacket tube) and remove the steering tube bezel
  
• Remove the two self-locking nuts which retain the instrument cluster and plastic dome retainer to the instrument panel and remove the retainer. These stud nuts can be reached through the opening between the panel and the jacket tube.
  
• Remove the two screws holding the junction block to the instrument panel and swing the junction block out of the way to allow for loosening of the screws attaching the astrodome supports.
• Carefully pull the supports away from the steering jacket tube to afford clearance and release the base of the cluster from the supports and at the same time, tip the complete unit towards you to clear the back of the cluster from the instrument panel eyebrow.
  
• Disconnect the speedometer cable and the ornament lamp socket at the speedometer head, remove the four screws and remove the speedometer head assembly.